I’ve gotten this question from enough people that an explanation is in order.
If you hadn’t noticed from reading this blog or following me on social media, I like pretty spinning. I love my gorgeously dyed combed top wool. I delight in matching my spindles to the fiber. I thrill at the constant glamour shots throughout my spin. And I revel in the experience of coaxing the fiber into yarn with my supported spindles. As a process spinner, the experience is the whole point!
Yet here I am, using my Starling eSpinner to plow through seven two-ounce batts of Shetland wool. For my annual gratitude spinalong. It made sense at the time; this spin represents the gratitude I feel for the spinning community and my fiber friends.
And like the spinning community and my fiber friends, this. Spin. Will. Not. End.
This is what happens when a process spinner tries to spin for a project, I guess.

You might recall the worsted yarn I spun back in May when visions of a half-hap Shetland shawl danced in my mind. Following that experience, a kind and generous friend shared washed fiber from Shetland fleeces she had on hand—one charcoal (from a sheep named Cora), one white (from Galen)—to make the body of the shawl. Once the locks were cleaned and flicked open, I had about seven ounces each, or 14 ounces total, to spin and then finally knit into that shawl.
We brainstormed together and devised a vision of a gradient from charcoal at the center back/top of the shawl fading to white at the edges, with the worsted spun Shetland forming the Old Shale border. (Hopefully the 400 yards will be enough.) Then we began hunting for the right pattern. Most garter-knit half-hap patterns appeared to start at one corner rather than the center of the long end, but that wouldn’t suit the intended gradient. I wanted to find a pattern before I started spinning so I could guesstimate how much yarn I needed, but time was running out. As long as I had enough yarn total, the actual amounts of yarn needed for each color for each row of the shawl didn’t really matter, right? While I realized for any triangular shawl pattern, each successive row would need more yarn, figuring out exactly how much required some kind of math that I wasn’t ready for! At least I knew the darkest charcoal at the center back/top would need the least yardage, and the white should need the most. Who needs math anyway?
Originally, I had planned for five colors for the gradient:
- 100% white
- 25% charcoal / 75% white
- 50% charcoal / 50% white
- 75% charcoal / 25% white
- 100% charcoal
Each blend would weigh about three ounces. Unfortunately, that added up to 7.5 oz of both charcoal and white needed, which was slightly more than I had. That might have been okay for the charcoal, since I would need the least of it, but it wouldn’t be okay for the white. Plus, a more gradual color transition would help if the rows in the middle area needed to be wider to fit the pattern (if I ever actually found one). I changed the plan to seven two-ounce batts. With the spinalong starting November 1st, I got busy blending with my drum carder. To help keep track of the batts, I gave them each a family name based on their “parents”.
- 100% white — Galen
- 16% charcoal / 84% white — Galena
- 33% charcoal / 67% white — Galora
- 50% charcoal / 50% white — Coralen
- 67% charcoal / 33% white — Cordelia
- 84% charcoal / 16% white — Coralie
- 100% charcoal — Cora

Yep. Seven shades of gray.
Well, that was the plan anyway. Apparently, my scale is inaccurate, and I ran out of charcoal just shy of what Galena needed.
And then two the last two blends (Galora and Galena) visually looked too similar. Since I (accidentally) had leftover white, I removed some of the Galena blend and replaced it with an equal amount of white. Whew! I finished blending the batts just in time for the start of the Spinalong with only a few mishaps along the way.
I decided to start spinning with the 100% charcoal (Cora), since it ought to need the least amount of yarn. That way, it wouldn’t matter if some of the yarn turned out ugly while I was still settling into a rhythm with the Shetland, woolen spinning, and using my eSpinner.
In the meantime, I kept researching patterns and finally settled on the “triangular” variation of this shawl. Now that I had an actual pattern, I finally did the design work that I should have done in the first place. I carefully plotted out 28 shawl repeats—four rows for each color—on a custom 14 by 14 grid.

One problem. Well, one new problem. The triangle pattern only has 24 (right-side) rows, which regrettably is not divisible by seven.
Yes, I tried.
Twice.
Maybe I could just keep knitting for four more rows and hope for the best? But I didn’t want to do (yet more) math to make sure the lace edge actually matched up with the sides of the triangle.
(As I am writing this, I realized I also could have just… you know, left out one of the colors altogether, and used only six batts. Last I checked, six goes into 24 quite nicely…)
So, I adjusted my grid to match the number of pattern rows. My simplest way to make the colors match the rows was to give pure charcoal six rows, and the remaining colors three rows each. Plus, I hoped giving the Cora six rows would look visually more balanced when(ever) I (finally) wear the shawl.

The pattern also included a most useful bit of information: expected yardage for each row! I threw those figures into a spreadsheet (as one does) to calculate the total yardage for each color. I realize this is almost like math, but the spreadsheet was doing the heavy lifting.

And thanks to the spreadsheet, I now know that Cora actually needs the MOST yardage of the entire shawl. Ughhhhh.
I also realized shortly into the spinalong that I can’t just spin. So many of my Starling bobbins are taken up with supported spinning WIPs, I only have three free: one for each singles yarn (one ounce each, roughly half the batt), and the third to ply on. As a result, even though I am using my eSpinner, I have only barely started on Cordelia (batt 3) because I had to ply Cora and Coralie first! Halfway through the spinalong, I am not even halfway through spinning!
I would ask, “At this point, what else could go wrong?” but that sounds like a challenge to the spinning powers-that-be.
And honestly? It no longer matters what I was thinking. I’m in too deep to stop now!

It’ll be such a satisfying end result, having worked around these challenges to get there!
Thank you! That’s what I am hoping!